New
Products
![]()
Bopp &
Reuther Flow Measuring Equipment
|
Density Meter with Hart Communication |
DIMF 2.1 Density Meter |
Click on the
pictures above to open up their specification sheets
( You need
Adobe Acrobat Reader )
Product Description :
- Density meter with Hart communication
The DIMF series
density/concentration meter is based onthe oscillating element principle. The
fluid to be measured flows through the oscillating element (a tuning fork for
Type 1.3, an oscillating tube for type 2.0) that is excited electromagnetically
and will oscillate at its natural frequency. Changes in the density of the
fluid lead to changes in the natural frequency. These frequency changes will be
picked
up by the electronic transducer and converted into a signal proportional to
density or concentration. The measured variable is available as a 4-20 mA
output signal and can be shown on the on-site display. Major applications are
process control and quality monitoring of fluids in all areas of industry. The
device can also be used for density mass flow conversion for custody transfer
in connection with the
corresponding volumetric meters and flow computers.
- DIMF 2.1 Density Meter
The DIMF 2.1 series
density/concentration meter is based on the oscillating principle. The fluid to
be measured flows through the oscillating element, an oscillating tube with a
free cross-section dimension of 25 mm, that is excited electro-magnetically and
will oscillate at its natural frequency. Any change in the density of the fluid
leads to a change in the natural frequency. These frequency changes will be
picked up by the electronic transducer and – allowing for the temperature of
the fluid to be
measured – converted into a signal proportional to density or concentration.
The measured variable is available
as a 4-20 mA output signal and can be shown on the on-site display. Major
applications are process control and quality monitoring of fluids in all areas
of industry. Due to the high cross-section the DIMF 2.1 is also recommended for
use in the main pipe. Difficult measuring materials such as pasty media or
media containing pieces of fruit can be measured without blocking the pipe.
Temperature, Pressure, Flow Meter All In One
Click on the
picture above to open up the specification sheet
( You need
Adobe Acrobat Reader )
Product Description :
- FluidVision 4000
FluidVision 4000 instruments measure flow rate, temperature
and pressure of water, water/glycol mixes, Galden™, Fluorinert™ and many other
liquids. All three transducers are contained in a single sensor unit, providing
a compact and simple installation.

Click on the
picture above to open up the specification sheet
( You need
Adobe Acrobat Reader )
Product Description :
- HX 75, HX 150, and HX 300 process chillers
The NESLAB HX-150
process chiller provides 4.5kW of reliable cooling for your critical process.
- Flexible
configurations tailored to your application
- Stability
of +/- 0.1C
- Keeping
your process consistent for the results you need
- 2
controller options: Simple and Cost Effective or Sophisticated and
Powerful
- Air or
Water Cooled Condensers depending on your facility requirements
NESLAB Recirculating Chillers & Heat
Exchangers
|
|
|
|
Dimax Series |
Steelhead Series |
Click on the pictures
above to open up the specification sheets
( You need
Adobe Acrobat Reader )
Product Description :
Thermo's water-to-water heat
exchangers are extremely reliable, offer a low cost
of ownership, support multiple applications, and are
designed leak free to ensure maximum uptime.
- Dimax Series
The Dimax series adopts a modular construction, designed
with innovative technologies, it is Semi S2000 & F47 Compliant. It also has
the capability to support multiple channels.
- Steelhead Series
The Steelhead series has medium and high temperature
units. There is also extended (3x) DI Life, with AMAT 0/AMAT 1 equivalent.
Applications include: deposition, Etch, CVD, HDP
|
|
ACCURATE GAS
CONTROL INC -CHILLERS

Aquasant Messtechnik Measuring Instruments
To visit Aquasant's Website click here
now
To view Aquasant's
product brochure click here now
Aquasant Messtechnik AG was founded in 1982, they offer the highest quality
operational measuring instruments to the chemical industry.Increasing needs of
instrument installations in the fields of automation and safety have resulted
in a specific range of electro-optical and capacitive measurement, monitoring
and control devices. Examples of Aquasant products are level probes and
switches, product monitoring tube probes, bar probes, safety level switches and
level control systems









