Process Engineering Equipment
Bopp &
Reuther Flow Measuring Equipment
For more information on the different series of
wheel meters, click here now
|
|
|
|
Density Meter with Hart Communication |
DIMF 2.1 Density Meter |
Click on the
pictures above to open up their specification sheets
( You need
Adobe Acrobat Reader )
Product Description :
- Density meter with Hart communication
The DIMF series
density/concentration meter is based onthe oscillating element principle. The
fluid to be measured flows through the oscillating element (a tuning fork for
Type 1.3, an oscillating tube for type 2.0) that is excited electromagnetically
and will oscillate at its natural frequency. Changes in the density of the
fluid lead to changes in the natural frequency. These frequency changes will be
picked
up by the electronic transducer and converted into a signal proportional to
density or concentration. The measured variable is available as a 4-20 mA
output signal and can be shown on the on-site display. Major applications are
process control and quality monitoring of fluids in all areas of industry. The
device can also be used for density mass flow conversion for custody transfer
in connection with the
corresponding volumetric meters and flow computers.
- DIMF 2.1 Density Meter
The DIMF 2.1 series
density/concentration meter is based on the oscillating principle. The fluid to
be measured flows through the oscillating element, an oscillating tube with a
free cross-section dimension of 25 mm, that is excited electro-magnetically and
will oscillate at its natural frequency. Any change in the density of the fluid
leads to a change in the natural frequency. These frequency changes will be picked
up by the electronic transducer and – allowing for the temperature of the fluid
to be
measured – converted into a signal proportional to density or concentration.
The measured variable is available
as a 4-20 mA output signal and can be shown on the on-site display. Major
applications are process control and quality monitoring of fluids in all areas
of industry. Due to the high cross-section the DIMF 2.1 is also recommended for
use in the main pipe. Difficult measuring materials such as pasty media or media
containing pieces of fruit can be measured without blocking the pipe.
|
|
|
Oval Wheel Meters |
- Oval Wheel Meters
Application:
Measure the volume flow rate of liquids and liquefied
gases and in loading system in the chemical and petrochemical industry, in the
mineral oil industry, in the food and beverage industry.
Reliability
- High accuracy over many years
- High reliability and long service
life
Special Features
- No up and downstream meter tube
necessary
- Large measuring range
- High viscosities
- Broad range of materials for large
number of fluids
- Mechanical and electronic counters
- Approved for fiscal metering
Flexiblity
- DN 6- DN 400
- 6 l/h to 1.2 m3/h
- <0.3 to 100.000 mPas
- -40 degrees C to +290 degress C
- up too 100 bar
- Current and pulse output, Hart
- Electronics and mechanical local
display
- FDT-Driver available
Temperature,
Pressure, Flow Meter All In One
Click on the
picture above to open up the specification sheet
( You need
Adobe Acrobat Reader )
Product Description :
- FluidVision 4000
FluidVision 4000 instruments measure flow rate,
temperature and pressure of water, water/glycol mixes, Galden™, Fluorinert™ and
many other liquids. All three transducers are contained in a single sensor
unit, providing a compact and simple installation.
Heinrichs Flow
Measuring Equipment
For
more information visit http://www.heinrichs-mt.com
Product
Description :
Heinrichs offer a comprehensive
range of top-quality
measuring instruments that enable liquid and gaseous media to be
reliably metered, controlled and regulated. Their products are
applicable in many fields like the chemical and petrochemical industry,
equipment manufacturing industry, pharmaceutical industry and food and
beverage processes.
Aquasant
Messtechnik Measuring Instruments
To visit Aquasant's
Website click here now
To view
Aquasant's product brochure click here nowct
Descripti
Aquasant Messtechnik AG was founded
in 1982, they offer the highest quality operational measuring instruments to
the chemical industry.Increasing needs of instrument installations in the
fields of automation and safety have resulted in a specific range of electro-optical
and capacitive measurement, monitoring and control devices. Examples of
Aquasant products are level probes and switches, product monitoring tube
probes, bar probes, safety level switches and level control systems
Download Adobe Acrobat Reader here